How do you sleeve your cards? Penny sleeves seem to rough up corner.

Dkwautounion · 03-24-2021, 02:15 PM

I penny sleeve then top load my cards. Seems like on my older ones that first corner that goes sometimes gets a little ding. Am i doing it wrong ?

droidcrijon · 03-24-2021, 02:28 PM

I cut the corner of the penny sleeve with scissors then insert the card.

Sent from my Pixel 4a using Tapatalk

gmoney328 · 03-24-2021, 03:09 PM

Quote:

Originally Posted by droidcrijon

I cut the corner of the penny sleeve with scissors then insert the card.

Sent from my Pixel 4a using Tapatalk

This..

Dkwautounion · 03-24-2021, 03:48 PM

Which corner?

HickryHornDevil · 03-24-2021, 07:59 PM

Quote:

Originally Posted by Dkwautounion

Which corner?

all four

haha no just one of the top corners
and make the last corner to enter sleeve
is the one that was cut on

PelicanFly · 03-25-2021, 12:26 AM

Quote:

Originally Posted by droidcrijon

I cut the corner of the penny sleeve with scissors then insert the card.

Sent from my Pixel 4a using Tapatalk

Just break one corner of the penny sleeve. You don't need to have scissors/razor blade/exacto to serve the same purpose.

mizzoujohn · 03-25-2021, 12:13 PM

Skip the penny if using a card saver. No point to it.

deathwished13 · 03-25-2021, 10:10 PM

If using a card saver I'd recommend thick penny sleeves. If top loading then yeah cut the corner but it's a thing you just have to be patient with

Sent from my KYOCERA-E6920 using Tapatalk

deathwished13 · 03-25-2021, 10:10 PM

Quote:

Originally Posted by Dkwautounion

Which corner?

The middle one

Sent from my KYOCERA-E6920 using Tapatalk

49ersSF · 03-25-2021, 10:55 PM

Simply split one of the sides on the penny sleeves and you will never have any problem putting a card into the sleeve.

salas1991 · 03-26-2021, 09:44 AM

Quote:

Originally Posted by Dkwautounion

I penny sleeve then top load my cards. Seems like on my older ones that first corner that goes sometimes gets a little ding. Am i doing it wrong ?

Grab each side of the sleeve with one finger and slide the one finger away from the other horizontally so you create an open pocket at the top of the sleeve. That way you can pop the first corner in, no problem. Sometimes getting the other side in needs a bit of patience, but I've never really had any issues going that route.

03-24-2021, 02:15 PM	#1
Dkwautounion Member Join Date: Feb 2021 Posts: 28	How do you sleeve your cards? Penny sleeves seem to rough up corner. I penny sleeve then top load my cards. Seems like on my older ones that first corner that goes sometimes gets a little ding. Am i doing it wrong ?

03-25-2021, 10:55 PM	#10
49ersSF Member Join Date: Dec 2017 Location: San Francisco Posts: 3,901	Simply split one of the sides on the penny sleeves and you will never have any problem putting a card into the sleeve. __________________ They see what they have been told to see.

03-24-2021, 02:28 PM	#2
droidcrijon Member Join Date: Aug 2020 Location: Eastern Washington Posts: 103	I cut the corner of the penny sleeve with scissors then insert the card. Sent from my Pixel 4a using Tapatalk

03-24-2021, 03:48 PM	#4
Dkwautounion Member Join Date: Feb 2021 Posts: 28	Which corner?

03-25-2021, 12:13 PM	#7
mizzoujohn Member Join Date: Feb 2021 Posts: 175	Skip the penny if using a card saver. No point to it.

03-25-2021, 10:10 PM	#8
deathwished13 Member Join Date: Apr 2011 Posts: 798 deathwished13	If using a card saver I'd recommend thick penny sleeves. If top loading then yeah cut the corner but it's a thing you just have to be patient with Sent from my KYOCERA-E6920 using Tapatalk