What size toploader/screw down/magnetic holder do I need for my card?

admin_blowoutcards · 08-25-2009, 10:51 AM

There are many different cards with many different thicknesses. This post will try to help you figure out which holder will fit your card the best.

First, measure the thickness of your card with a ruler in mm (millimeters).

If you check our list of toploaders (Toploaders : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store), you'll see the following sizes:

1.5mm - 59pt
2mm - 79pt
2.75mm - 108pt
3.5mm - 138pt
5mm - 197pt
7mm - 240pt

So 1mm is approximately equal to 40.0pt

Magnetic Holders : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store
Screwdowns : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store

benshobbies · 04-12-2010, 07:29 PM

Not sure if this is helpful. Here is how I judge it without the ruler.

Base Card: 3x4 premium toploaders or RC toploaders if rookie card.
Framed Card, Topps Platinum/Mayo like thick card: (About 108 pt, thick toploaders)
Common Game Used: 138 pt.
Letterman, 197 pt.

Anything thicker than a letterman, or a bulging patch would be wise to measure with a ruler. If this post is not helpful, delete it. It is what I have learned from experience and fuzzy math.

I use BCW supplies only.

Grandpa · 02-07-2011, 10:15 PM

Thank You & God Bless

JDK16 · 02-07-2011, 10:20 PM

good post... nothing worse then getting one size to small

nuggetsman28 · 02-26-2011, 01:05 PM

I need to know this, What size are Exquisite Cards? Also, what size are the Hot Prospects RPA's? I need some of that size but am always confused about toploaders and Magnetics which I need!

astrosox · 07-09-2011, 01:34 PM

Can anyone confirm whether or not an Ultra Pro magnetic 55 pt holder will fit Ginter autos from 2007-2010?

jlzinck · 07-09-2011, 02:22 PM

Quote:

Originally Posted by astrosox

Can anyone confirm whether or not an Ultra Pro magnetic 55 pt holder will fit Ginter autos from 2007-2010?

I use 75pt if that helps

NamesJay · 06-16-2012, 02:23 PM

OK I guess I'm confused... I measured an A&G relic card and it appeared to be 1 mm thick, so that should be 40 pt.

Wouldn't the 75 pt holders leave too much room for the card to move around?

I'm guessing 35 or 55 would have to be used... 35 is too tight tho, right?

mainerunr · 08-11-2012, 03:18 PM

Quote:

Originally Posted by NamesJay

OK I guess I'm confused... I measured an A&G relic card and it appeared to be 1 mm thick, so that should be 40 pt.

Wouldn't the 75 pt holders leave too much room for the card to move around?

I'm guessing 35 or 55 would have to be used... 35 is too tight tho, right?

For toploaders, I've tried both, couldnt remember which size i had last time so I bought both 75 and 55 the other day. the 55's are a little tight, 75's a little looser. I can say it will be a PITA getting the card out of a 55 but it does not appear to bow the holder at all. I would think 55 would be fine for a mag holder.

bengal808 · 06-04-2013, 12:28 AM

is there a top loader or screw down for 2013 Bowman baseball
topper autograph?

lzylghtn · 06-18-2014, 10:48 AM

Anyone know the best size for Topps Murad SILK cards?

08-25-2009, 10:51 AM	#1
admin_blowoutcards Administrator Join Date: Jun 2007 Posts: 1,138 blowoutcards	What size toploader/screw down/magnetic holder do I need for my card? There are many different cards with many different thicknesses. This post will try to help you figure out which holder will fit your card the best. First, measure the thickness of your card with a ruler in mm (millimeters). If you check our list of toploaders (Toploaders : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store), you'll see the following sizes: 1.5mm - 59pt 2mm - 79pt 2.75mm - 108pt 3.5mm - 138pt 5mm - 197pt 7mm - 240pt So 1mm is approximately equal to 40.0pt Magnetic Holders : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store Screwdowns : Blowout Cards - Sports Cards and Trading Cards Wholesale Online Store __________________ Shop for Sports Cards and Trading Cards Last edited by admin_blowoutcards; 05-17-2010 at 01:35 PM.

02-26-2011, 01:05 PM	#5
nuggetsman28 Member Join Date: Jul 2009 Posts: 3,936	I need to know this, What size are Exquisite Cards? Also, what size are the Hot Prospects RPA's? I need some of that size but am always confused about toploaders and Magnetics which I need! __________________ Wild'n Cuz I'm Young...

04-12-2010, 07:29 PM	#2
benshobbies Inactive Account Join Date: Feb 2010 Location: Berkshire County, MA Posts: 7,547 benshobbies benshobbies	Not sure if this is helpful. Here is how I judge it without the ruler. Base Card: 3x4 premium toploaders or RC toploaders if rookie card. Framed Card, Topps Platinum/Mayo like thick card: (About 108 pt, thick toploaders) Common Game Used: 138 pt. Letterman, 197 pt. Anything thicker than a letterman, or a bulging patch would be wise to measure with a ruler. If this post is not helpful, delete it. It is what I have learned from experience and fuzzy math. I use BCW supplies only.

02-07-2011, 10:15 PM	#3
Grandpa Member Join Date: Oct 2010 Posts: 7	Thank You & God Bless

02-07-2011, 10:20 PM	#4
JDK16 Member Join Date: Jan 2011 Posts: 5,644	good post... nothing worse then getting one size to small

07-09-2011, 01:34 PM	#6
astrosox Member Join Date: Aug 2010 Posts: 451	Can anyone confirm whether or not an Ultra Pro magnetic 55 pt holder will fit Ginter autos from 2007-2010?

06-16-2012, 02:23 PM	#8
NamesJay Member Join Date: Jul 2010 Location: Tampa, FL Posts: 999 nolanjaylefler NamesJay	OK I guess I'm confused... I measured an A&G relic card and it appeared to be 1 mm thick, so that should be 40 pt. Wouldn't the 75 pt holders leave too much room for the card to move around? I'm guessing 35 or 55 would have to be used... 35 is too tight tho, right?

06-04-2013, 12:28 AM	#10
bengal808 Member Join Date: Jun 2010 Posts: 4	is there a top loader or screw down for 2013 Bowman baseball topper autograph?

06-18-2014, 10:48 AM	#11
lzylghtn Member Join Date: Feb 2009 Posts: 610	Anyone know the best size for Topps Murad SILK cards?